Reinstallaion: Reverse the procedure to reinstall the burner. Check that the valve enters the burner when
installing. Replace the glass embers. When the appliance is put back in service, check the burner lame
patern with the image below.
NORMAL
ABNORMAL
Cleaning The Outer Appliance Surface: Do not use abrasive cleaners or steel wool on any painted, or
stainless steel parts of your Napoleon Appliance. Doing so will scratch the inish. Exterior surfaces should
be cleaned with warm soapy water. To clean stainless surfaces, use a stainless steel or a non-abrasive
cleaner. Always wipe in the direcion of the grain. Over ime, stainless steel parts discolor when heated,
usually to a golden or brown hue. This discoloraion is normal and does not afect the performance of the
appliance
WARNING!
The appliance area must be clear and free from combusible materials, gasoline and
other lammable vapors and liquids. Do not obstruct the low of combusion and venilaion air. Keep
the venilaion opening of the cylinder enclosure free and clear of debris.
17
EN
www.napoleongrills.com