LG D005KD1N111 Manuel D'installation page 45

[PCS] settings
You can set or check the PCS settings and status.
NOTE
y All the values on the [PCS] screen should not be edited by user It may cause system
malfunction if you change the values by user.
y Viewable information names are listed below -
Stable Volt Mode, fixed cosPhi Type, fixed cosPhi Setpoint, cosPhi(P) Type, cosPhi(P) Start,
cosPhi(P) End, cosPhi(P) PowerStart, cosPhi(P) PowerEnd, fixedQ Reactive Setpoint, Q(U)
NumOfActive Point, Q(U) Xa, Q(U) Xb, Q(U) Xc, Q(U) Xd, Q(U) Xe, Q(U) Xf, Q(U) Xg, Q(U) Xh,
Q(U) Ya, Q(U) Yb, Q(U) Yc, Q(U) Yd, Q(U) Ye, Q(U) Yf, Q(U) Yg, Q(U) Yh, Q(U) Power Lock-in, Q(U)
Power Lock-out, Q(U)_OP Reactive range
y When changing the option values of [PCS] menu, refer to page 80 for more information.
Select [PCS] on [Installer Settings]. PCS
information is displayed.
[PCS]
All the setting options and values of PCS
information are displayed
[Feed in limitation], [installation Date] options
can be changed manually.
Set the options as described below.
1. Select the currently selected value. Input
menu appears on the screen.
2. Input desired value.
3. Select [Accept] to complete the setting.
Tab [ADVANCED] to show more setting options
for the PCS.
Settings
45
.
3