IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Read and understand all instructions before using
this product. Save these instructions for later use,
and follow all warnings and instructions marked
on the product.
WARNING:
IMPORTANT SAFETY GUARDS
TO AVOID SERIOUS INJURY
± Please read the entire manual carefully
before operating this shredder.
± NEVER insert hand or fingers into
feed opening.
± Keep eyes protected from opening.
± Keep children and pets away from shredder
AT ALL TIMES.
± Keep personal and loose objects
(jewelry, ties, long hair, etc.) away
from entry.
± Never use flammable, petroleum-
based, canned air, or aerosol cleaners
on this product. Some agents may
combust, causing serious injury. Use
only recommended lubricant in a
non-aerosol container (see Maintenance).
CAUTION:
± Never allow children to operate paper
shredder, even under adult supervision.
Paper shredders can pull children's
fingers into the shredder mechanism.
± Do not exceed the recommended sheet
capacity.
± Do not shred plastic (except credit cards), continuous
forms, adhesive labels, transparencies, newsprint or
cardboard.
± Do not shred large paper clips or other hard
materials.
± This shredder is intended for indoor use only.
± NEVER place the shredder near water or
any heat source. Avoid direct contact with
water.
± To reduce the risk of electronic shock, use only indoors
and in dry locations.
± Do not use this product if it or the cord has been
damaged in any way. (See "Power Cord Care".)
± Do not service this product yourself. Do not open the
cover for any reason. Doing so can expose you to
dangerous voltages and will void your warranty.
± Make sure the shredder is plugged into an easily
accessible electrical wall outlet.
± Always turn off the shredder by unplugging the
machine before moving, cleaning or any other conduct
other than normal operation.
± This shredder should be used only with an
operator in attendance. Keep the shredder in the OFF
and unplugged from the AC outlet when not in use for
an extended period of time.
± Avoid shredding envelopes, labels or anything with glue
or adhesives as this will lead to paper jams.
POWER CORD CARE
± Operate shredder from the power source indicated
on the serial label. If you are unsure of the power
source, consult your dealer or local power company.
± Since the power cord serves as the disconnect
switch, make sure the shredder is plugged into an
easily accessible wall outlet. If the power cord is
damaged, call Technical Support for help.
± Do not rest anything on the power cord.
± Do not place machine where persons may trip over
or walk on the power cord.
± If an extension cord is used, make sure that the
total ampere ratings of the products plugged into
the extension cord do not exceed the extension
cord ampere rating, and that the total of all
products plugged into the wall outlet does not
exceed 15 amp.
3