Rack Dry (Applicable Models Only) - Samsung DVE50R8500 Série Mode D'emploi

Rack Dry (applicable models only)

Some models come with a drying rack which is inserted into the drum at the factory. If
your model came with a drying rack, remove the rack from the drum before you use the
dryer for the first time. To remove the rack, pull the rack straight up, and then take it out
of the drum. Remove the drying rack from its packaging and store the rack for later use.
A
Untitled-4 39
If a drying rack is not provided, you can
purchase it at a local Samsung service
center. (Part Code : DC93-00374G)
To use the drying rack, follow these steps:
1. Insert the drying rack (A) inside the
tumbler with the filter handle to the
front.
2. Insert the rear legs of the drying rack
into the recessed areas of the rear wall,
and then press down the middle of the
drying rack to secure it in place.
3. Put items to dry on the rack. Make sure
to leave space between the items for air
flow.
4. Press Rack Dry, and then select the
drying time.
5. When the items are dry, remove the
them from the dryer, and then remove
the drying rack.
English 39
2019-09-16 4:50:38