Input/Output Connection; Operating Instructions; General Instructions - OxyGo NEXT Mode D'emploi

Input / Output Connections
Particle Filter
The filters must
be in place at the
intake ends of
Intake
the concentrator
Vent
during operation
to keep input air
clean.
DC Power In
Connection for
external power
from the AC power
supply or DC power
cable.

4. Operating Instructions

General Instructions

1. Place the OxyGo NEXT in a well
ventilated location.
2. Air intake and exhaust must have clear
access. Locate the OxyGo NEXT in such
a way that any auditory alerts may be
heard. Always operate the OxyGo NEXT
in an upright position (see image for
proper orientation).
3. Ensure particle filters are in place at both
ends of device.
4. Insert the OxyGo NEXT battery by sliding
battery into place until the latch returns
to the upper position.
5. Connect the AC input plug to the power
supply. Connect the AC power plug
to the power source and connect the
power output plug to the OxyGo NEXT.
The green LED on the power supply will
be illuminated and a beep will sound
from the concentrator.
Cannula Nozzle
Fitting
The nasal cannula
connects to this
Intake
nozzle for OxyGo
Vent
NEXT output of
oxygenated air.
USB Port
For service use only.
1., 2., 3.
Intake
Vent
Intake
Vent
Exhaust
Vent
4.
6