Maintenance Items; Oxygo Next Column Change Procedure - OxyGo NEXT Mode D'emploi

Maintenance Items

Replacement intake particle filters
Output Filter Replacement Kit
OxyGo NEXT columns
Note: Additional options may be available for country-specific power cords. To order contact
your equipment provider.
For assistance, if needed, in setting up, using, maintaining, or to report unexpected operation or
events, contact your equipment provider or manufacturer.
OxyGo NEXT
Column Change Procedure
1. Turn off the OxyGo NEXT concentrator by pressing the power button to shut
down the device.
2. Remove the OxyGo NEXT concentrator from the carry case.
3. Remove the battery from the OxyGo NEXT concentrator.
4. Place the OxyGo NEXT concentrator
on its side so that the underside is
visible. The metal column assembly
can be seen on one side of the
device.
5. A. Unlock the column assembly by
pushing the latch button away from
the columns, or
B. By inserting the column tool (as
shown). See step 8 and remove top
dust cap to obtain tool.
1400-3310
1400-2322
1400-3060
4
(Actual appearance may vary,
depending on model with or
without pull handle.)
5A
5B
20