Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO
Problem
Heating element does not glow red.
Do not feel heat or air flow.
© 2018 Stanley Black & Decker, Inc.
A POWER SOURCE
Troubleshooting
Cause
1. Heating element is a resistive
strip and will not glow red to
produce heat.
1. No power to heater.
2. Heater is not on a solid surface.
3. Desired room temperature
reached.
Electric Fan Heater User's Manual (ST-221A-120 / ST-222A-120)
5
Solution
1. Heater is operating correctly.
1. Check power connections /
connect heater to power supply.
Main power indicator light
should be on.
2. Heater is equipped with a tip-
over switch on the bottom of the
heater. Make sure the heater is
on a solid surface.
3. Thermostat will shut off once
desired room temperature is
reached. Heater is operating
correctly.
Publicité
Table des Matières
