Instrument Configuration - Promax SATHUNTER Mode D'emploi

If moving the antenna the MER value exceeds the quality reference (configurable
by software), the instrument will emit a high-pitched audible signal and the word MER
will become bold (MER). If the MER value is below the quality reference then the
instrument will emit a low-pitched audible signal and the word "MER" will not change.
Note: For the final step of precise adjustment and the optimisation of the signal
quality, it is important to select the most critical test point. This will
guarantee the quality for the other points with better conditions.
To switch off the instrument, simply press any of the three instrument keys (
[1], [2], o

4.3 Instrument Configuration

The various parameters and information stored in the SATHUNTER can be
modified using the PC program RM-011 "CONFIGURATION SOFTWARE FOR
SATHUNTER". This program is supplied with the instrument.
The program allows you to define the number of test points, the different
parameters for each point and the user and company's name.
Once the instrument has been configured, it has to be rebooted in order to apply
the changes.
All the necessary information for configuring the instrument and for using the
"CONFIGURATION SOFTWARE FOR SATHUNTER" program can be found in the
manual accompanying the program.
Page 20
[3]) for more than two seconds.
SATHUNTER USER'S MANUAL.
11/2009