Beninca IRI.KPAD.C Mode D'emploi page 20

3.2) DELETING A CODE
1 Press the PGM button twice on the BE.REC receiver. The LED starts to flash with a frequency of 2 flashes followed by a
pause.
2 On the keypad type the code to delete, on each pressing the buzzer emits a sound to confirm typing.
3 Press the key (#), the buzzer emits three beeps to confirm deletion.
3.3) COMPLETE DELETION OF THE MEMORY
1 Press and keep the PGM button pressed on BE.REC for 15s. The red and green LEDs initially off flash alternatively,
when flashing finishes the deletion is also complete.
2 Having deleted the receiver return to the timed output settings of 1s and the access password in advanced mode
123456.
4) KEYPAD LOCK FUNCTION ACTIVATION
The keypad lock function can be activated after 5 wrong consecutive codes have been entered.
The keypad remains locked for 3 minutes, in order to prevent further attempts to access.
The activation of the function does not depend on the mode of use (STAND-ALONE or REMOTE).
If the Remote mode is used, the firmware of the BE.REC receiver must be successive to1.03.
To activate the keypad lock, proceed as follows:
- enter the login password (default 123456) and press ENTER
- enter 7 and press ENTER
- enter:
1 to deactivate the lock function
2 to activate the keypad lock function
- press ENTER
- the alarm emits 3 beeps
20