Dörr KL-16 Notice D'utilisation page 10

06.3 TURNING ON/OFF AND FURTHER FUNCTION OF KL-16
<5
Press On/Off (3)
sec.
once
Turn on
100% brightness
(white LED)
Press for
2 seconds:
LED light switches off
Sensor function
with 100% brightness is
activated.
Sensor function LED
(2) lights up in red.
Turn On/Off the LED
light with a hand wave
in front of the sensor.
Press 1x shortly
to turn off
the LED light.
Sensor function LED
(2) turns off.
ATTENTION
While KL-16 is in sensor mode with light off, it will drain energy. After usage do not forget to turn off completely.
<5
Press On/Off (3)
sec.
2 time
nd
50% brightness
(white LED)
Press for
2 seconds:
LED light switches off LED light switches off
Sensor function
with 50% brightness is with 25% brightness is
activated.
Sensor function LED Sensor function LED
(2) lights up in red.
Turn On/Off the LED Turn On/Off the LED
light with a hand wave light with a hand wave
in front of the sensor. in front of the sensor.
Press 1x shortly
to turn off
the LED light.
Sensor function LED Sensor function LED
(2) turns off.
<5
Press On/Off (3)
sec.
3 time
rd
25% brightness
(white LED)
Press for
2 seconds:
Sensor function
activated.
(2) lights up in red.
If the light is longer
than 5 seconds in
the head light can
Press 1x shortly
to turn off
directly pressing the
the LED light.
On/Off button once.
(2) turns off.
10
Press On/Off (3)
Press On/Off (3)
twice shortly
4 time
th
(double-click)
Off 100% brightness
LED light switches off
with 100% red LED
brightness is activated.
Sensor function LED
(2) lights up in red.
Turn On/Off the LED
light with a hand wave
Note
in front of the sensor.
a light mode,
Press 1x shortly
be turned off
the LED light.
Sensor function LED
Turn on
(red LED)
Press for
2 seconds:
Sensor function
to turn off
(2) turns off.