Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
- Cutlery can be introduced immediately after finishing the laundry in the dishwasher; the cutlery must
get
wet with cold water if some time has passed after its exit.
- Introduce the cutlery through the upper opening ( groups of twelve pieces for SH-7000 and five
pieces
for SH-3000 ).A small interval should be left between a bundle and another to avoid any type of block.
( FIG.6)
- After beginning to feed the machine it will carry out automatically the drying and polishing process.
Once finished the process, the cutlery will begin to leave for the outlet and be ready to be used. ( FIG.7).
If the machine has been working for a long time, four hours more or less and you observe that the
sawdust has a high degree of humidity, you will have to leave the machine working without cutlery
for half and hour to eliminate the excess of humidity.
FIG. 4
23
EN
NO
FIG. 5
FIG. 6
YES
Publicité
Table des Matières
