Settings - Cartrend 10632 Notice D'utilisation

Setting the clock
1. Navigate to "current time".
2. Hold the function wheel [4] toward the back for 2 seconds. the minute display will flash.
3. tap the function wheel [4] forward or backward to set the minutes.
4. Briefly press the function wheel [4]. the hour display will flash.
5. tap the function wheel [4] forward or backward to set the hours.
6. Hold the function wheel [4] in the middle for 2 seconds again. the multifunction display will appear.
activating/deactivating key tones
1. Hold the function wheel [4] forward for 5 seconds. this deactivates the key tone.
2. Hold the function wheel [4] forward for 5 seconds again. this activates the key tone.
Driving time monitor
If this symbol flashes, the driving time monitor is activated.
take a break.
1. Shut off the engine.
2. take a break or change drivers.
3. restart the engine. the symbol will now disappear.

SEttINgS

the values on the head-up display should match the values on your vehicle's fascia. If this is
not the case, you can change the settings of the head-up display in the settings menu.
1. Hold the function wheel [4] for 2 seconds. this opens the settings menu.
2. tap the function wheel [4] forward or backward to change a value.
3. Briefly press the middle of the function wheel [4] to move to the next setting.
4. Hold the function wheel [4] for 2 seconds again to exit the settings menu.
EN Operating Instructions
23