Cartrend 10632 Notice D'utilisation page 19

Warning!
Damaged lines can cause fatal electric shock. Discontinue using cables if damaged.
• Improper use of the head-up display can result in serious injuries and damage.
• Do not modify (alter) the head-up display.
• Secure the cable so it will not come into contact with moving parts.
• Only power this device with a vehicle's OBD-II interface with a voltage of 12 v. this device is
not intended for use with JOBD or OBDI.
• Protect the head-up display from serious shock.
• Never allow the device to come into contact with water or other liquids. Water entering elec-
trical devices will increase the risk of electric shock. If the device has come into contact with
water, unplug immediately. Discontinue use of the device and take it to a speciality shop.
• Be sure to keep all plugs and cables dry.
• Please read and observe the instructions for use and all safety notes for the battery being
monitored and the vehicle before using this device.
• always test your vehicle in a safe environment.
• run the vehicle in a well ventilated work area. Exhaust fumes are poisonous and can result in
death by asphyxiation.
• When connecting the head-up display, always ensure this does not affect the safety and
functionality of other systems and devices in the vehicle! Please note the information in the
vehicle owner's manual.
• Connecting the head-up display incorrectly can damage the vehicle's electronics. this could
result in an accident or fire. attention! risk of personal injury and property damage!
• repairs must be performed by a qualified technician.
• Using a mobile device whilst driving may distract from traffic. Maintain your focus on driving
and traffic.
• the airbag being released can project devices mounted near the airbag at high speeds,
resulting in serious injuries. Never mount the mobile device near airbags.
EN Operating Instructions
19