Fagor NVP-200 QC Manuel D'installation page 4

Addendum 030213 for the NVP-200QC manual. Code: 14460018 version 0009
Adenda 030213 para el manual del NVP-200QC. Código: 14460018 versión 0009
New features V01.01:
1. More memory for measured elements.
This version increases to 100 the number of measured elements stored in memory and they
are not lost when the DRO is turned off. The elements are numbered from 0 to 99 and the
element measured after number 99 overwrites the first element.
To clear this memory completely, press: [CLEAR] [8]
2. More memory for statistics. Now up to 300 elements may be stored.
3. Automatic "Q" axis calibration.
Rotate the screen a known angle to "teach it" to the DRO.
- Within the calibration menu select "Q axis".
- Enter the desired angle.
- Rotate the screen the desired angle or press [Y] and enter the number of pulses
corresponding to the indicated angle.
- Press [ENTER] to finish.
4. New option for SKEW.
It is now possible to force the axis to be aligned with a line by pressing the desired axis key
[X] or [Y] after measuring or recalling a line.
New parameters:
PAR51 STORE memory data as either measured or statistical elements
Bit 3 = 0 The STORE memory data is used as measured elements istead of statistical
elements.
Bit 3 = 1 The STORE memory data is for statistics only.
PAR92 Selection of point capturing method with the optical fiber.
= 0 Normal
= 1 Capture a point when moving from dark to light.
= 2 Capture a point when moving from light to dark.