Braun cruZer FACE Mode D'emploi page 13

stretching the skin, guide the wide trimmer against the direction of hair
growth.
The narrow trimmer (4b) precisely defines lines and edges (d), being ideal for
precise contouring.
To use the narrow trimmer, push up the twistable trimmer and turn it 180°.
Frequent use of the twistable trimmer will reduce the battery capacity.
Trim
Using the trimming attachments (1) and (7)
Place the respective trimming attachment onto the shaver foil (2) alternatively
on the twistable trimmer (4) and press it against the shaver housing until it
snaps into place with a click (e).
3-day beard comb & protective cap (1): This attachment is perfectly suited
for creating a stubble look and maintaining it.
• Place the attachment onto the foil (2) and push up the twistable trimmer (4).
Turn on the shaver and use the appliance as shown in the illustration (e).
The attachment ensures an optimum usage angle.
Adjustable comb (7): This attachment is ideal for beard trimming and keeping
it at a constant length.
• Place the attachment onto the shaver foil (2) and set desired beard length.
Press beard length selector (8) and slide it up (f) (possible length settings
from top to bottom: 1.2 mm / 2.8 mm / 4.4 mm / 6 mm). Push up the
twistable trimmer (4).
• Press the on/off switch and trim against hair growth by guiding the
transparent comb part over the skin (f).
Cleaning
The shaver head is suitable for cleaning under running tap water.
Warning: Detach the shaver from the power supply before cleaning
the shaver head in water.
Regular cleaning ensures better shaving performance. Rinsing the shaving
head after each shave under running water is an easy and fast way to keep
it clean:
• Switch the shaver on (cordless) and rinse the shaving head under hot
running water (g). You may use liquid soap without abrasive substances.
Rinse off all foam and let the shaver run for a few more seconds.
13