john deer D100 Série Manuel D'instructions page 9

INSTALL THE ROOF FRAME
1
OR
Locate the right and left roof frame parts (OR, OL)
3
OR
P1
Insert the top ribs [P1, P2, P3] into both top frames [OR, OL]. Each top frame has
three short protruding tube stubs on one side. These stubs on the top frames
should face each other when properly assembled. Secure by inserting the ribs into
the protruding tube stubs until the spring push buttons click into the holes.
5
Completed frame.
OL
P3
P2
OL
2
P1
P2
P3
Locate top rib parts (P1, P2,P3).
Note: The front rib is the longest and the back rib is the shortest.
4
To complete the frame assembly, attach the roof assembly to the front and rear
uprights. Insert the ends until the spring push buttons click into the holes in the
top frames. It may be necessary to tap on the roof assembly with a rubber mallet
to get the spring push buttons to properly engage.
9
D100 SERIES AND S200 WEATHER ENCLOSURE