emerio UVC-121660.7 Mode D'emploi page 6

UVC-121660.7
PARTS DESCRIPTION
1. Battery pack
2. Dust cup
3. Extension tube
4. Floor brush
5. Long crevice nozzle
6. 2 in 1 crevice nozzle
7. Speed button
8. On/off button
9. Handle
10. Dust cup release button
11. Accessory release button
12. Suction hole opening
13. Dust release button
14. Battery indicator lights
15. Wall-mounted bracket
16. Expansion bolts and screws
17. Charging adapter
18. Accessory hook
HOW TO WALL-MOUNT BRACKET
1. Measure the distance between the holes situated at the back of the bracket and drill three holes in the wall
with the same distance.
2. Put the expansion bolts into the holes and then use the screws to fix the bracket onto the wall.
3. Pay attention to the height of the bracket mounted.
BATTERY CHARGING:
1. Push the release button (A) and take the battery pack out.
2. Insert the charging adapter into the power inlet (B) of the battery, and then into the power socket.
When charging, the indicator light (C) will be red and blinking. Once fully charged, the indicator light
3.
will keep bright in blue.
4. You can also charge the battery through the main body. The three battery indicator lights will indicate one by
one to show the battery capacity. When the battery is fully charged, all three lights will keep bright in blue.
- 5 -
EN