Table des Matières
Publicité
en - Installation
WiFi Stick
a Connection plug
For connecting the WiFi stick to the
hob
Risk of heat damage.
The wireless module will suffer dam-
age if subjected to heat.
Do not attach it to the underside of
the hob.
Do not place it on top of an oven or a
cooker.
The cable for the wireless module
must not come into contact with the
underside of a hob, or with an oven/
cooker or other built-in appliance.
36
Secure the wireless module to the fur-
thest point away from metal compon-
ents. Also make sure that there are no /
or very few metal parts in the path
between the wireless module and the
antenna in the cooker hood.
Disconnect the hob from the mains
electricity supply.
Secure the wireless module under-
neath the worktop, such that the WiFi
stick can be fitted.
Fit the black plug on the WiFi stick
into the socket on the hob.
The position of the socket is shown in
the building-in diagram for your hob.
Reconnect the mains electricity sup-
ply.
The hob can be signed on after ap-
prox. 1 minute.
Sign the hob on as described in the
Operating instruction manual for your
hob.
If you are unable to establish a con-
nection, please secure the wireless
module to a different position where
the signal is not hindered.
Publicité
Table des Matières
