Setting The Air Flow Direction - EINHELL MKA 2500 E Mode D'emploi

Anleitung MKA 2500 7spr.

SETTING THE AIR FLOW DIRECTION

The horizontal air grille has to be adjusted by hand.
1. Adjusting the horizontal air grille:
The horizontal direction of the air current is controlled
by the horizontal air grille. This grille has to be
adjusted by hand.
2. Adjusting the vertical air grille:
Press the SWING button for the vertical air grille to
move back and forth from side to side.
External air grille:
Horizontal adjustment by hand.
Internal air grille:
Automatic vertical adjustment by pressing on the
SWING button.
28.02.2005 10:56 Uhr Seite 11
FITTING THE EXHAUST PIPE
The exhaust pipe can be between 300 mm and 1500
mm long. Kinks and sharp bends in the pipe should
be avoided to guarantee that the exhaust air can flow
out unobstructed. If not, there is a risk that the
appliance as a whole will overheat and cut out. This
may result in damage to the appliance.
Caution!
The length of the exhaust pipe is calculated to match
the technical specifications of the appliance. Do not
lengthen the pipe or the appliance may develop a
fault.
right
right
wrong
GB
11