Names And Functions Of Indicators On Remote Controller - d2itsu ASD 9U2 Manuel D'instructions

06ManualMandoDaitsuEng 21/12/06

NAMES AND FUNCTIONS OF INDICATORS ON REMOTE CONTROLLER

88
16:17 Página 88
TRANSMISSION INDICATOR
This transmission indicator lights when remote controller transmits signals to
the indoor unit.
MODE DISPLAY
Displays the current operation mode. Including AUTO, COOL, DRY,
HEAT(cooling only type without), FAN ONLY and back to AUTO.
ON/OFF DISPLAY
Displayed by pushing the ON/OFF button.
Push the ON/OFF button again to disappear.
TEMP. DISPLAY
º
Displays the temperature setting (17 C to 30
mode to FAN ONLY, no temperature setting is displayed.
CLOCK DISPLAY
The current time is indicated.(0 24 hours)
TIMER DISPLAY
The time set for timer operation is indicated. (0 24 hours)
LOCK DISPLAY
Displayed by pushing the Lock button.
Push the Lock button again to disappear.
FAN SPEED DISPLAY
Displays the selected fan speed, AUTO and three fan speed levels "LOW"
"MED" "HIGH" can be indicated. Displays AUTO when the operating mode
is either AUTO or DRY.
ECONO. DISPLAY
(Some models without)
Display by pushing the ECONO. button.
Push the ECONO. Button again to disappear.
• In the illustration, all displays are indicated for the sake of clarity. During
operation, only the relevant displays will be shown on the remote controller.
º
C When you set the operating