•
Do not leave the appliance unattended
when it is turned on because it can be
dangerous.
•
When removing the plug never pull on
the cable.
•
Unplug the appliance before cleaning
or maintenance.
•
In the event of fault or malfunction
where the appliance is not to be used,
turn off the appliance and do not
attempt to repair. If a repair is required,
contact a Technical Assistance Service
authorised by the manufacturer and
request the use of original spare parts.
•
If the cable for this appliance is damaged,
contact an authorised Technical
Assistance Service for it to be replaced.
•
Do not leave the appliance exposed to
the elements (rain, sun, ice, etc.).
•
Do not use or let any part of the
appliance come into contact or near
hot surfaces (kitchen gas or electric
hobs or ovens).
•
Do not use detergents or abrasive
sponges to clean the appliance.
•
Do not touch the hot surfaces. Use the
handles.
•
Do not let the cable come into contact
with the hot parts of the appliance.
•
Do not use detergents or abrasive
scourers to clean the product.
•
Do not immerse the body of the
appliance or the power cable in water
or in any other liquid.
•
The blades are very sharp; handle them
with great care.
•
Avoid contact with the blade when the
appliance is in use.
•
Before assembling or dismantling any
of the parts of this appliance, unplug
the blender.
•
Do not chop foods which are very hard
such as coffee beans or cereals.
•
Do not use the blender for more than 1
minute continuously.
•
Do not use the chopper for more than 1
minute.
•
Before using the appliance, make sure
that all the accessories are properly
attached to the blender body.
•
This blender is not suitable for heavy
doughs.
4. PREPARING THE APPLIANCE
This blender is designed to process small
quantities of food and must not be used for
any other purpose. The blender is suitable
for liquidising carrots and potatoes, and
for making milkshakes, pastry, soups,
mayonnaise or baby food.
Before using it for the first time, clean the
body of the motor (4) with a damp cloth.
Wash the blender leg (5), the multi-purpose
lid (7), the chopper lid (9), the chopper
jug (10), the chopping blade (11) and the
tapered container (12) in hot soapy water.
Dry all parts thoroughly.
IMPORTANT: Unplug the appliance before
assembling or dismantling any of its parts.
WARNING: The blades are very sharp;
handle them with great care.
5. OPERATING INSTRUCTIONS
Blender function
• The blender is suitable for blending light
foods, for example for making sauces,
soups, mayonnaise or baby food.
• Attach the blender leg (5) to the blender
body (4) by turning it anti-clockwise until
it is securely in place (Fig. B).
• Put the food to be blended into a
suitable container such as the tapered
container provided with the product.
• Before turning it on, put the blender
leg vertically into the ingredients to be
processed (Fig. C). This will prevent the
food from spilling out over the edge or
splashing.
• Plug in the appliance.
• Press the on/off switch (2) to start the
processing.
• Select the speed by turning the speed
regulator (1) from the – (minimum)
position to the + (maximum) position
(Fig. D). If you think it is necessary,
press the Turbo button (3) to blend at
maximum speed.
It is advisable to use this appliance
intermittently, i.e. in short bursts. This will
12