Petra M85 Mode D'emploi page 6

Putting into operation
Prior to first use wipe the inside of the lid and the
container with a damp cloth and rub dry afterwards.
Connect the appliance to a socket. Then filll the bowl
and put on the lid.
The maximum capacity of 60 g is sufficient for about
10 cups of coffee.
maximum level
For security reasons the fly cutter mill can be operated
with fixed lid only. For grinding, press down the button
on the lid until the desired degree of fineness is
obtained.
This can be observed through the transparent cover
during operation.
After the fly cutter has stopped the coffee powder can
be emptied. Prior to this, disconnect the appliance.
Caution: danger of injury! In any case wait until the
fly cutter has stopped operation!
Cleaning and maintanance
After use unplug the appliance. Never immerse the
appliance in water, clean the outside with a damp cloth
only. Do not use caustic or scouring cleaning agents.
For cleaning, the fly cutter can be detached, by turning
it anti-clockwise and removing it by lifting. Remaining
powder can be removed by a brush.
Afterwards simply put the fly cutter on the rotation
element. The fly cutter is fixed automatically as soon as
the motor starts working.
The replacement of a damaged cord and any repairs to
the appliance may only be carried out by a specialized
service agent, as special tools are required.
6