Exo Terra Terrarium Fixture Mode D'emploi page 4

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION OF LIGHTING UNIT (p. 2)
1. Clean the outside surface of the terrarium glass.
2. With the protective backing still intact, place the self-adhesive
support base on the back or the side of the terrarium to
determine its final position.
3. Mark the position with a wax pencil or other marker.
4. Remove the protective backing and carefully fit the self-adhesive
support base within the marked area.
5. Make sure the tape is pressed evenly against the terrarium glass
and that no air bubbles are showing.
6. Press the adhesive sides firmly against the glass panel for at
least 30 seconds and make sure the tape is attached firmly to
the terrarium before releasing the fixture.
7. Once in place, the Terrarium Fixture should not be removed.
8. Adjust the height and tighten the screw of the Terrarium Fixture
to suspend the fixture above the terrarium at the desired height.
9. Ensure that the light's focal point is not positioned above any
plastic parts of the terrarium or screen cover to prevent damage.
10. Screw light bulb into the Exo Terra
maximum wattage guidelines).
Maintenance
No special maintenance is required for the Exo Terra
Fixture, other than periodic cleaning with a cloth (never use harsh
chemical products or detergents). To remove calcareous deposits
(bulb sockets), it is recommended to use a mild acid such as vinegar,
followed by a thorough wipe down with a damp cloth to remove
any residues.
6
TIP: apply a thin layer of petroleum jelly to the threads on the base
of the light bulb before screwing it in. This will make it easier to
unscrew the bulb when it is time to replace it.
GUARANTEE
This product is guaranteed for defects in material or workmanship
for a period of 1 year from date of purchase. The guarantee is valid
with proof of purchase only. The guarantee is limited to repair or
replacement of the product only and does not cover consequential
loss or damage of or to animate or inanimate objects. The warranty
does not cover wear and tear parts. The warranty also does not
cover a product which has not been regularly and correctly cleaned
and maintained. This guarantee is valid only under normal operating
conditions for which the product is intended. It excludes any damage
caused by unreasonable use, improper installation, negligence,
tampering, or abuse of the product. For guarantee service contact
your local pet retailer or write to the representative in your country.
This guarantee does not affect your statutory rights.
Service
If you have any problems or questions about the operation of
this product, please let us try to help you before you return the
product to your dealer. Most problems can be handled promptly
with a phone call. When you call (e-mail or write), please have all
relevant information such as model number and/or part numbers
available, as well as the nature of the problem. Please ensure that all
maintenance instructions have been adhered to before returning the
product to your retailer.
Terrarium Fixture (follow
®
Terrarium
®
Call our Customer Service Department:
Canada:
Rolf C. Hagen Inc.
20500 Trans Canada Hwy
Baie d'Urfé QC
H9X 0A2
Toll Free Number 1-800-55HAGEN (1-800-554-2436)
Between 9:00 am and 4:30 pm (Eastern Time)
http://faq.hagencrm.com/?en
U.S.A.:
Rolf C. Hagen (U.S.A.) Corp.
50 Hampden Road, Mansfield, MA. 02048
Toll Free Number 1-800-724-2436
Between 9:00 am and 5:00 pm (Eastern Time)
mail to: customer.service-usa@rchagen.com
For general information on our whole product range, explore
our websites at: www.exo-terra.com or www.hagen.com.
Distributed by:
Canada: Rolf C. Hagen Inc., Montreal, QC H9X 0A2
U.S.A.: Rolf C. Hagen (U.S.A.) Corp., Mansfield MA. 02048

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pt2240

Table des Matières