Makita XLC02 Manuel D'instruction page 7

010000
Connect capsule. Align O symbol on
capsule with O symbol on handle and then
firmly twist capsule in direction of arrow until
it is secured.
1
010001
010002
NOTE:
Always remove dust ahead of time, as
•
suction power will be reduced if there is
too much dust in cleaner.
Always be sure to check that both filter
•
and prefilter are loaded correctly prior to
using cleaner. If they are not loaded
correctly, dust will get into the motor
housing, and cause motor failure.
If the following examples occur, filter
and prefilter are not loaded correctly.
Reload them
problem.
1. Mark
1. Handle
1
2. Capsule
2
correctly to
Problem Examples
Example 1: Only prefilter has been loaded
(no filter)
010003
Example 2: Only filter has been loaded
(no prefilter)
1
010004
Example 3: Filter has been loaded in a
peeled back state
010005
Example 4: Prefilter's securing lip is not
firmly locked into groove of cleaner housing
rectify
2
010006
7
1
1
3
1
1. Prefilter
1. Filter
1. Filter
1. Groove of
cleaner housing
2. Prefilter
3. Securing lip