Product Information - VONROC VPower 20V Traduction De La Notice Originale

6) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SAFETY WARNINGS FOR BATTERY
a) Do not open the battery. Danger of short-circuiting.
b) Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
c) In case of damage and improper use of the bat­
tery, vapours may be emitted. Ventilate the area
and seek medical help in case of complaints.
The vapours can irritate the respiratory system.
d) Use the battery only in conjunction with your
Vonroc product. This measure alone protects
the battery against dangerous overload.
e) The battery can be damaged by pointed objects
such as nails or screwdrivers or by force applied
externally. An internal short circuit can occur and
the battery can burn, smoke, explode or overheat.

2. PRODUCT INFORMATION

Intended use
Only use the following VONROC POWER 20V battery
platform charger. Using any other charger could
cause serious injury or damage the battery.
CD802AA Quick charger
The batteries of the VONROC POWER 20V battery
platform are interchangeable with all the VONROC
POWER 20V battery platform tools.
TECHNICAL SPECIFICATIONS
Model No
Battery Type
Voltage
Capacity
Recommended charger
Weight
WWW.VONROC.COM
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2.
1. Battery unlock button
2. Battery LED indicators button
3. Battery LED indicators
4. Battery
3. OPERATION
Inserting the battery into the machine (Fig. B)
1. Insert the battery (4) into the base of the machi-
2. Push the battery further forward until it clicks
Removing the battery from the machine (Fig. B)
1. Push the battery unlock button (1)
2. Pull the battery out of the machine like shown
Checking the battery charging status (Fig. A)
• To check the battery charge status, push the
• The battery has 3 lights indicating the charge
• When the lights are not burning it means the bat-
CD801AA
Lithium-Ion
20V
2.0 Ah
CD802AA
0.3 kg
Before any work on the power tool, remove
the battery.
The battery must be charged before first use.
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
ne as shown in Fig. B.
into place.
in Fig. B.
button (2) on battery shortly.
level, the more lights that burn, the more char-
ge the battery has left.
tery is empty and must be charged immediately.
When the machine is not being used over a
longer period of time it is best to store the
battery in charged condition.
EN
5