Publicité
Les langues disponibles
Les langues disponibles
- The suction cup grab bar is not designed to hold or support your full body weight.
- This grab bar is designed to assist your natural motion, as when stepping into or out
of a shower. Do not stress by pulling or with other movements.
- Always check the attachment and holding condition of suction cup through windows
every time before each use.
- Do not attach to moving surfaces.
- Maximum User Weight : 60 kg (vertical); 45 kg (lateral)
- Only for product code 28974 - Maximum User Weight: 85 kg (vertical); 60 kg (lateral)
The manufacturer will not be held responsible for damages to people or things
if the product is used for non compliant use or for incorrect or unsafe use.
It is designed for use only on smooth and non-porous surfaces; tile, porcelain or
fiberglass. Not for use on wall board, wood, painted or papered surfaces.
FITTING
1. Thoroughly clean and the surface with alcohol wipe and allow to dry and check the condition
of the suction cups. Do not use if damaged, cracked or split.
2. Raise both levers, place the suction grab bar so that both suction cups lie firmly and completely
on a smooth surface.
3. Hold one end and press on one lever with your palm, You should feel resistance as the
suction cup tightens.
REMOVAL
1. Lift each of the two levers.
2. If suction remains, gently lift one edge with a finger.
3. Do not use a sharp instrument which may damage the suction cup.
4. Always to keep the levers flip up until next use.
ENGLISH
4
Publicité
