LF Master Forge BG2294B-LS Mode D'emploi page 13

ASSEMBLY INSTRUCTIONS
Attach Side Burner assembly onto firebox.
13. Attach two pcs Screws (AA) into the upper
two holes on left side of firebox. Leave the
screw heads protruding approximately 0.2
inches.
Hardware Used
AA
M6x16 mm Screw
14. Hang the Side Burner Assembly on the
two screws attached in the previous step.
Secure the Side Burner Assembly in place
using screws (AA) and (BB) in the lower
three holes as shown.
Hardware Used
AA
M6x16 mm Screw
BB
M6x12 mm Screw
15. Attach Knob Bezel (K) to Side Burner
Assembly with two pcs Screws (DD).
Attach Knob (L) to Knob Bezel.
Hardware Used
DD
M4x8 mm Screw
x2
x2
x1
x2
13
13
AA
0.2 inches
14
15
DD
AA
BB
K
L