OK. OPJ 102 Mode D'emploi page 23

Size - A5
ASSEMBLY OF THE JUICE EXTRACTOR
1
Put the motor unit on
a flat, stable and slip-
resistant surface.
3
Put the strainer base into
the motor unit.
5
Put and align the lid on the
strainer base.
OPJ102_A5_130627.indb 23
23
2
Position the pulp container
on the designated lid
holder.
4
Connect the strainer to the
motor screw.
6
Move up the locking arm.
Note
Press the motor unit when
setting up slightly onto the
surface so the suction feet
find a good hold.
Note
Make sure that the strainer
is securely connected to
the motor screw to prevent
damage during operation
of the device.
7
Put a juice container/glass
under the spout.
27/6/13 2:58 PM