koban KMOS-01 Mode D'emploi page 230

5-27.Changing Meter Setup Options
The Meter has a number of preset features such as date and time formats and battery save mode
timeouts, and the displayed language. These variables are referred to as Meter setup options.
Many setup options affect general Meter operations and are active in all functions. Others are
limited toone function or group of functions.
Access to the setup options is always available through the
softkey labeled Setup. Information about the Meter, such as
serial number, model, for example. is also accessed
through the setup menu.
5-28.Resetting Meter Setup Options
The Meter's setup options can be reset to default values through the setup menu. Open the
setup menu by pressing the softkey labeled Setup. Position the menu selector next to the menu
item labeled Reset and press the softkey labeled Setup. A message will appear asking to
confirm the reset action. Press the softkey labeled OK to perform the reset.
5-29.Meter Info
The Meter Info selection lists the serial number, model number, firmware version, calibration
date, and calibration counter. Operator name, company name are displayed.
5-30.Setting the Event Threshold Value
Press the softkey labeled Setup to access the setup menu.
Using the cursor buttons, move the menu selector next to the menu item labeled Instrument
and press the softkey labeled Enter to open the recording setup screen. Using the cursor
buttons,move the menu selector next to the menu item labeled Event Threshold for Recording
(AutoHOLD) and then press the softkey labeled Edit. Press
threshold values. With the desired value selected, press the softkey labeled Close.
5-31.Calibration
The Calibration selection allows a qualified calibration technician to enter a
password that allows the Meter to be calibrated.
Press the softkey labeled Setup to access the setup menu. Using the cursor
buttons, move the menu selector next to the menu item labeled Calibration and
press the softkey labeled Calibrate, Then input password ,Enter Calibration menu.
If change password, Press the softkey labeled Setup to access the setup menu.
Using the cursor buttons, move the menu selector next to the menu item labeled
Calibration and press the softkey labeled password, Then input current password,
Then input new password.
True RMS Multimeter
or to scroll through the event
27