Operation; Turning The Tv On And Off; Plug & Play Feature - Samsung 450 Serie Guide De L'utilisateur

Operation

Turning the TV On and Off

Press the POWER button on the remote control.
You can also use the POWER
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently.
The Screen Saver is activated if there is no remote control key input for longer than 1
minute while "Plug & Play" is running.
The Screen Saver is activated if there is no operating signal for longer than 15
minutes.
1. Press the POWER button on the remote control.
The message "Menu Language, Store Demo, Channels and Time will be set." is
displayed.
Press the ENTER button,
is automatically displayed.
2. Press the ▲ or ▼ button to select language, then press the ENTER
The message "Select 'Home Use' when installing this TV in your home." is
displayed.
3. Press the ◄ or ► button to select "Store Demo" or "Home Use", then
press the ENTER button.
The message "Select the antennas to memorize." is displayed.
We recommend setting the TV to "Home Use" mode for the best picture in your
home environment.
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to "Store Demo" mode and you want to return to
"Home Use" (Standard): Press the Volume button on the TV. When the volume
OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4. Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the ENTER
button to select "Start".
Air: "Air" antenna signal.
Cable: "Cable" antenna signal.
Auto: "Air" and "Cable" antenna signals.
In Cable mode, you can select the correct signal source among STD, HRC, and
IRC by pressing the ▲, ▼, ◄ or ► button, then press the ENTER
you have Digital cable, select the cable system signal source for both Analog and
Digital. Contact your local cable company to identify the type of cable system that
exists in your particular area.
5. The TV will begin memorizing all of the available channels.
To stop the search before it has finished, press the ENTER
selected.
After all the available channels are stored, it starts to remove scrambled channels
(see page 39). The Auto program menu then reappears.
Press the ENTER
The message "Set the Clock Mode." is displayed.
button on the TV.
then "Select the language of the OSD"
button when channel memorization is complete.
menu
button.
button. If
button with "Stop"
English - 21
Plug & Play
Menu Language, Store Demo,
Channels and Time will be set.
Start
Plug & Play
Select the language of the OSD.
Language :
English
Español
Français
Move
Plug & Play
Select 'Home Use' when installing this TV in your
home.
Store Demo Home Use
Move Enter
Plug & Play
Select the antennas to memorize.
Start
Air
Start
Cable
Start
Auto
Move Enter
Plug & Play
Selects a cable signal type for your location.
Analog
Start
STD
HRC
IRC
Digital
STD
HRC
IRC
Move Enter
Auto Program Plug & Play
Auto Program in Progress.
DTV Air : 02 Air : 11
DTV Cable : 23 Cable : 21
Cable 50
Stop
Enter
Auto Program Plug & Play
Removing scrambled channel.
DTV Cable 41
Stop
Enter
Enter
Enter
Skip
Skip
50 %
Skip
77 %
Skip