Connections; Connecting The Fm Aerial; Connecting Speakers - Krüger & Matz KM1584CD Mode D'emploi

Owner's manual

CONNeCTIONS

Caution: Make all connections before plugging the unit into the AC Power outlet.

Connecting the FM aerial

Connect the supplied FM Antenna to the FM Antenna socket on the rear of the unit.
Caution:
To avoid noise, keep antenna away from the unit, the connecting cable and the AC power cable.
Connecting the Speakers
Connect the speaker cords between the terminals as shown below.
Connect the cable with a white head to the (-) terminals and cable with a red head to the (+)
terminals.
For the speaker side:
1. Unscrew the speaker connectors.
2. For the left speaker, identify the speaker cable that is connected to the left connectors on the
main unit.
3. Insert fully the red end of a speaker cable into the red (+) connector.
4. Screw the red (+) connector to secure the cable.
5. Insert fully the silver end of a speaker cable into the white (-) connector.
6. Screw the white (-) connector to secure the cable.
7. Repeat steps 2-6 for the right speaker.
Right Speaker Box
Rear View
AUX IN 1 AUX IN 2
ANTENNA
L L
R R
CABLE
ANTENNA
2
1
3
FM
FM
Left Speaker Box
Rear View
29