MSI 880GMA-E45 Série Mode D'emploi page 18

5. Position the cooling set onto the
retention mechanism.
Hook one end of the clip to hook
first.
7. Fasten down the lever.
Important
Mainboard photos shown in this section are for demonstration of the cooler installation
•
for Socket AM3 CPUs only. The appearance of your mainboard may vary depending
on the model you purchase.
While disconnecting the Safety Hook from the fixed bolt, it is necessary to keep an
•
eye on your fingers, because once the Safety Hook is disconnected from the fixed
bolt, the fixed lever will spring back instantly.
6. Then press down the other end of the
clip to fasten the cooling set on the
top of the retention mechanism.
Locate the Fix Lever and lift up it .
8. Attach the CPU Fan cable to the CPU
fan connector on the mainboard.
En-7