Sharing Your Mobile Data Connection - Sony Xperia Z2 Manuel D'utilisation

Ajouter une politique de veille Wi-Fi®
1
Dans votre Home screen, tapez sur
2 Tapez sur Réglages > Wi-Fi.
3
Appuyez sur .
4 Appuyez sur Options avancées.
5
Appuyez sur Wi-Fi actif en veille.
6
Sélectionnez une option.

Sharing your mobile data connection

You can share your device's mobile data connection with a single computer using a USB
cable. This process is called USB tethering. Similarly, you can share your device's mobile
data connection with other devices with NFC Wi-Fi® tethering or Bluetooth tethering.
You can also share your device's mobile data connection by turning your device into a
portable Wi-Fi® hotspot. When your device's mobile data connection is successfully
shared, the sharing devices can use your device's data connection, for example, to surf
the Internet, download applications, or send and receive emails.
You may need to prepare your computer to establish a network connection via USB cable. Go
to www.android.com/tether to get the most current information.
To share your data connection using a USB cable
1
Deactivate all USB cable connections to your device.
2
Using the USB cable that came with your device, connect your device to a
computer.
3
From your Home screen, tap
4 Find and tap Réglages > Plus... > Tethering & Mobile Hotspot.
5
Mark the Mobile Broadband Connect checkbox, then tap OK if prompted.
displayed in the status bar once you are connected.
6
To stop sharing your data connection, unmark the Mobile Broadband Connect
checkbox or disconnect the USB cable.
You cannot share both your device's data connection and SD card over a USB cable at the
same time.
To share your mobile connection by NFC Wi-Fi® tethering
1
Make sure that both devices have the NFC function turned on, and that both
screens are active.
2
From your Home screen, tap
3 Find and tap Réglages > Plus... > Tethering & Mobile Hotspot > NFC Wi-Fi
tethering.
4
Tap OK if prompted.
5
Hold devices back to back so that the NFC detection areas of each device touch
each other, and they will connect automatically.
This function only works with devices that also support NFC Wi-Fi tethering.
To use your device as Mobile Hotspot
1
From your Home screen, tap
2
Find and tap Réglages > Plus... > Tethering & Mobile Hotspot.
3
Tap Mobile Hotspot settings > Set up Mobile Hotspot.
4 Enter the Network name (SSID) information.
5 To select a security type, tap the Sécurité field. If required, enter a password.
6
Tap Enregistrer.
7 and mark the Mobile Hotspot checkbox.
Tap
8 If prompted, tap OK to confirm.
Fi® hotspot is active.
9 To stop sharing your data connection via Wi-Fi®, unmark the Mobile Hotspot
checkbox.
This is an internet version of this publication. © Print only for private use.
.
.
.
.
appears in the status bar once the portable Wi-
26
is