Only use the appliance if supervised (very dry bread may catch fire if toasted).
The metal parts heat up! Danger of burns!
Do not insert any forks, knives or such like in the toasting slot.
Do not place the appliance anywhere near inflammable objects (e.g. curtains, wood, etc.)!
1. Only connect the appliance to a correctly installed safety plug (220-240V 50Hz/60Hz).
2. Turn the selector switch clockwise to set the toasting level from the lightest stage 1 to the darkest
stage 6. If in any doubt, start with the lower setting (the black mark on the selector switch shows you
the setting).
3. Insert sliced bread into the toasting slot and push down the lever until it locks.
4. The appliance starts toasting. The appliance switches off immediately once the set degree of
toasting has been reached. The toast then pops up automatically.
If you wish to use the special functions, push the button Cancel: To stop toasting prematurely
Before cleaning, remove the plug from the socket and allow the appliance to cool down.
Use a moderately damp cloth to clean the outside of the appliance.
Do not use any aggressive or scrubbing detergents.
Grasp the crumb shaft by the loop and pull it out, remove the bread residue and push the shaft back
in.
This appliance conforms to the relevant CE guidelines and has been constructed on the basis of the
latest technical safety regulations.
Subject to technical changes!
Special Safety Instructions for this Appliance
Operation
Cleaning
Structure specification