LEGRAND 430 522 Manuel D'utilisation page 32

INSTALLATION USING REF . 430 594 WALL MOUNT BRACKET
a Install Wall Mount Bracket on wall.
c Connect "Drop Prevention Spring" to main body to
prevent camera from drop. Line up the mold lines
and turn main body on its axis in CW (Clockwise)
direction and assemble main body to Terminal
Cover.
b Assemble Terminal Cover to Wall Mount Bracket
with 3 screws. (Do not use Rubber Gasket !)
Locate the summit of the Plate Spring at the arrow
mark. (For more information, refer to the "Terminal
Cover Assembling" section)
)
)
d After assembling them, screw main body to
Terminal Cover to protect them from separation by
vibration and so on.
32
)
)