Pentair MICROBRITE Guide D'installation Et D'utilisation page 22

18
Set up a MicroBrite
To setup an AUX circuit to control the MicroBrite light, assign the circuit light function an
auxiliary relay circuit (AUX 1), then assign the circuit name for that light circuit. The light
circuit name will appear on the main screen. Each MicroBrite light must also be assigned a
circuit function.
To assign a Circuit Name for the MicroBrite light, go to: MENU > SETUP > ADVANCED
> CIRCUIT FUNCTIONS
Setup a MicroBrite light function circuit:
circuit name, then assign that light relay circuit in the "CIRCUIT FUNCTIONS" section,
as "INTELLIBRITE."
To setup the MicroBrite light circuit function (use the "IntelliBrite" circuit name):
1. Press the button next to the AUX button (the relay auxiliary circuit
connected to the MicroBrite (IntelliBrite) light).
2. Press the right or left side (PREV/NEXT) button next to "INTELLIBRITE."
Scroll through the circuit functions until "INTELLIBRITE" is displayed.
3. Press the SAVE button on the bottom of the screen. Press the EXIT button to
return to the main screen.
Assign the MicroBrite light circuit to the Lights screen:
4. Press the Lights button on the bottom of the screen.
5. Press the right side button next to "CONFIGURE."
6. Press the button next to "NONE" to assign an IntelliBrite light circuit to the
selected button. Light names can be setup to display on the left side for "Spa"
features and on the right side for the "Pool" features.
7. Press the top left or right side button to scroll through the available light cir-
cuits which can be used for the MicroBrite (IntelliBrite) lighting features. Select
at the circuit name you wish to use. The displayed circuit names are circuit
names that were previously assigned when assigning a circuit function.
Operating and Selecting MicroBrite (IntelliBrite
Color Modes
From the "Modes" screen you can select various preset show color lighting effects,
such as "American mode" and "Sunset mode," and Pentair SAm Color Changing Light
(an emulation of the SAm color scheme). Using the "Hold" and "Recall" feature you
can also capture and save a unique color effect to recall at a later time.
Modes screen
To access the IntelliBrite
screen, press the Lights button on the bottom of the screen, then press the left side
button next to "MODES."
Special Light Features:
on the main Lights screen (special light features). From the Lights screen you can
activate the IntelliBrite lighting features (i.e., color swim, color set). Assuming each
MicroBrite (IntelliBrite) light has its own relay and separate circuit.
MicroBrite Color and White Light Installation and User's Guide
™
Color and White LED Light Circuit Function
Color Light color show "Modes" features from the Lights
®
Up to twelve (12) IntelliBrite light circuits can be displayed
Assign each light auxiliary relay circuit a
® Color Light)