LD Systems LDMEI100G2 Manuel D'utilisation page 13

Set designation:
Belt pack receiver model designation:
Frequency range:
Channels:
Transmission method:
Frequency response:
S/N ratio:
THD:
Audio output:
Max. audio output level:
Controls:
Indicators:
Power supply:
Operating time:
Dimensions (W x H x D):
Weight:
Transmitter model designation:
Radio receiver frequency range:
Channels:
Operating modes:
Transmission method:
RF output:
Frequency response:
S/N ratio:
THD:
Inputs:
Input impedance:
Antenna connector:
Controls:
Indicators:
Power supply:
Operating voltage:
Dimensions (W x H x D):
Weight:
Headphone model designation :
Type:
Frequency response:
Impedance:
Connector type:
Cable length:
Our products are subject to a continuous process of development and improvement. Thus technical characteristics are subject to
LDMEI100G2
LDMEI100G2BPR
823 - 832 MHz and 863 - 865 MHz
96 (8 groups of 12 channels)
FM stereo
80 - 15,000 Hz
> 90 dB(A)
0,50%
3.5 mm stereo jack
100 mW
Volume/ On / Off, Set, arrow keys (up/down)
Multifunctional LC display, RF signal
2 "AA" size batteries
> 10 hours (depending on batteries)
65 x 95 x 25 mm
0.07 kg (without batteries)
LDMEI100G2T
823 - 832 MHz and 863 - 865 MHz
96 (8 groups of 12 channels)
Mono / stereo
FM stereo
10 mW
80 - 15,000 Hz
> 90 dB(A)
0,50%
2 x XLR/ 6.3 mm jack (combo)
100 kohms
TNC
Power (on/off), Set, arrow keys (up/down), headphone volume,
audio level (AF level) left/right, mono/stereo switch
Multifunctional LC display:
external power supply
12 V - 18 V DC, 300 mA
212 x 38 x 90 mm
0,57 kg
LDIEHP1
In-ear
30 - 20,000 Hz
16 ohms
3.5 mm stereo jack
1.5 m
change without notice.
SPECIFICATIONS:
13