Panasonic CF-VDRRT3W Mode D'emploi page 27

You cannot play DVD-
Video discs.
DVD-Video sound and
images are not played
smoothly.
The drive cannot be ac-
cessed even while it is op-
erating, or when Windows
Media Player cannot be
used.
Check the manual of the DVD-Video play software and the
points listed below.
The drive may not have been selected if more than one
drive has been connected.
Play is not possible unless the region codes of the DVD-
Video disc, this drive and the play software match.
Check whether the region codes match.
Depending on the DVD recording system, some discs may
not be played automatically.
In this case proceed as follows.
First, start PowerDVD, and insert the disc into the drive.
Select File from the PowerDVD play menu, and play the
disc.
DVD-RAM and DVD-RW in the VR format can be played
only by the user with the administrator's authority.
In order to play DVD-R and DVD-RW, it must be finalized
(a process that enables it to play on other DVD players etc.).
The computer must meet certain system requirements in or-
der for DVD-Video discs to be played smoothly. Check the
manual of the DVD-Video play software and the points listed
below.
If USB1.1 is used for the interface, the images and/or sound
may break up.
If another program has been started, exit it. When many
programs are started, the CPU may not have enough
capacity to handle all the ensuing operations.
Change the settings for the display area and colors. If the
display area and/or display colors are reduced, the CPU
capacity can be used more efficiently.
Check the CPU's speed setting. Some computers may be
set to the power-saving mode in which the CPU has a low
capacity.
Has the sound setting been set to muting?
Windows Media Player should not be exited by selecting the
button on the right corner of the window, while in operation.
Before exiting Windows Media Player, it is necessary to
stop the drive first by selecting the
If it is impossible to access the drive or to use Windows
Media Player, restart your computer.
button.
27
E