3.
After restore default setting, Must ensure that the player on the
horizontal plane and its screen up, at the same time, power on
and power off the player again.
4.
It is not sure that the player on the horizontal plane and its
screen up when you first time to power on the player after
upgrading or restoring setting, you can restore default setting
again, make sure that the player on the horizontal plane and its
screen up, at the same time, power on and power off the player
again, all these to make sure the player can work normally.
t rou bl esho ot i n g
• the player cannot be turned on
Check if the battery is low or flat recharge the play if required
by connecting to your PC with the USB cable. Ensure that the
computer is on during the charging process.
• No sound can be heard from the earphones
1.
Check if the volume is set as 0. Adjust the volume as re-
quired.
2.
Check the volume of the file attempting to be played.
3.
Confirm the earphone is properly connected.
• Noise through earphones
1.
Check if the earphone plug is clean, foreign particles can
cause static to be heard through the earphone during play-
back.
2.
Check if the music file is damaged. Confirm by playing other music.
The damaged file might create serious noises or voice dithering.
72