Table des Matières
Publicité
Manuel d'utilisation PA 21, 31, 36
10.2
Visualisation des paramètres
Appuyez sur la touche « P » pour accéder aux valeurs des paramètres:
------------------------------------------------------------------
-
PA21 BG01
-
PA21SW001/0
------------------------------------------------------------------
L1 user range
300.0 - 2000.0 C
L1 epsilon ............ 100.0 %
L1 transmission ....... 100.0 %
L1 backcomp. .............. off
L1 linearization .......... off
L1 filter ........... automatic
L1 memory type ............ off
Unit .................. Celsius
Terminal assigned to ...... USB
Autoprint ................. off
Print cycle time ......
Protocol address .......... 001
Display ................ active
Key lock .................. off
Status LED ... assigned to Do 1
------------------------------------------------------------------
>
10.3
Sous-menus
10.3.1 Lambda 1
Appuyez sur la touche „1" pour accéder aux menus du facteur Lambda 1
(L1).
------------------------------------------------------------------
Submenu LAMBDA 1
------------------------------------------------------------------
L1 epsilon ............ 100.0 %
L1 transmission ....... 100.0 %
L1 backcomp. .............. off
L1 linearization .......... off
L1 filter ........... automatic
L1 memory type ............ off
E: Epsilon
T: Transmission
B: Background-Compensation
L: [LINEARIZATION]
F: Filter
M: [MEMORY]
P: Show parameter
Q: Show calibration data
X: Show measure temperatures
Y: Show premax measure temps.
ESC: Back to MAIN-MENU
------------------------------------------------------------------
>LAMBDA 1 >
300-2000C -
SP 1.1 – 1.7 um
Ao 1 source .......... lambda 1
Ao 1 scale ..
Ao 1 current .......... 0-20 mA
Ao 2 source ............... off
Do 1 source ............... off
Do1 function ......level/signal
Do1 delay time ..........0.00 s
Do1 hold time............0.00 s
Do 2 source ............... off
0.1 s
Version 01.68
14.12.11
-30.0 -
33
-
-
70.0 C
Publicité
Table des Matières
