Beko MWB 2000 EX Mode D'emploi page 6

ATTENTION: The following steps are for
the Microwave Oven models with the Built-
in Trim Kit Frame Only.
1. After taking all the accessories out of
the microwave oven, turn the
microwave oven over on its back and
keep the base of the microwave oven
facing towards you.
2. Remove the adjustable feet (Fig. No.
2) from the plastic bag and screw
them into the holders (Fig. No. 1), one
by one.
3. Once all 4 feet are fitted, turn the
microwave oven back over onto its
feet to check if the adjustable feet are
level. If the microwave oven is
unstable, adjust the feet by screwing
them up or down accordingly.
6
EN