Technical Data - Leroy Merlin KL-1012 Mentions Légales & Consignes De Sécurité

CAUTION! This product shall not be discarded with household waste but that it shall be returned to a
collection system which conforms to the European WEEE Directive. Contact your local authorities or stockist
for advice on recycling. It will then be recycled or dismantled in order to reduce the impact on the environment.
Electric and electronic equipment can be hazardous for the environment and for human health since they
contain hazardous substances.
3、TECHNICAL DATA
Rated Voltage: AC220-230V~50Hz
Rated power input: 8W (30W)
Usage
Load the glue stick into the hole from back of the machine, put the machine on the flat place
to avoid the silicone head touching any substance.
Connect the plug with properly voltage.Waiting for 5 mins, than hold the tool and press the
trigger to extrude the glue, pressing approximately once every 2 seconds.
If you use more than 2 glue sticks during the same session,then space out pressing the trigger
to approximately 9 seconds from the 3rd stick.
Hold the tool and aim to the target place while fluid flue coming out.
Maintenance
Your power tool has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular
cleaning.
If the supply cable is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard