Control Settings - GE GWS03ADWSS Manuel D'utilisation Et D'installation

About the control and settings.

Control Settings

After plugging in the wine chiller, turn
the Temperature Control Knob located
on the exterior rear wall of the cabinet
to the position corresponding to the desired
setting on the dial. The temperature ranges
between 40°F (4,4°C) and 60°F (15,6°C)
in a typical 70°F (21,1°C) room. The dial has
a suggested preset temperature for Red
and White wine.
A guide with wine serving temperature
suggestions is located on the inside right
portion of the unit. It gives recommended
temperatures for different wines.
When the Wine Chiller is Plugged In
After plugging in the wine chiller
and setting the desired temperature,
allow the wine chiller to reach the set
temperature before loading your wine.
The temperature may take up to 12 hours
to completely stabilize.
After loading the wine, you may
notice the actual temperature rise.
The temperature may take up to
12 additional hours to completely stabilize.
NOTE: The exterior of the cabinet may get
warm. This is normal.
ge.com
5