Special Accessories; Diamond Cutting Discs; Guide Cart; Water Tank - Dolmar PC-6412 Manuel D'instructions Et De Sécurité

Découpeuse thermiques
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SPECIAL ACCESSORIES

Diamond cutting discs (1)

DOLMAR diamond cutting discs meet the highest demands in
working safety, ease of operation, and economical cutting
performance. They can be used for cutting all materials
except metal.
The high durability of the diamond grains ensures low wear and
thereby a very long service life with almost no change in disc
diameter over the lifetime of the disc. This gives consistent
cutting performance and thus high economy. The outstanding
cutting qualities of the discs make cutting easier.
The diamond discs give highly concentric running for minimal
vibration during use.
The use of diamond cutting discs reduces cutting time signifi-
cantly. This in turn leads to lower operating costs (fuel con-
sumption, wear on parts, repairs, and last but not least environ-
mental damage).

Guide cart

(2)
The DOLMAR guide cart makes it much easier to do straight
cuts, while simultaneously enabling almost untiring working. It
can be adjusted for the operator´s height, and can be operated
with the cutting attachment mounted in the middle or on the
side.
For easier refuelling when using the cart, we recommend
adding an angled tank filler neck (3).
A depth limiter can be added for still easier and more accurate
cutting. It makes it possible to maintain a precise predeter-
mined cut depth (4).
To keep down dust and for better cutting-disc cooling, DOLMAR
offers several options for wetting the disc during operation.
1
3

Water tank

The water tank is designed to be mounted on the guide cart.
Its high capacity makes it especially suitable for situations
involving frequent site changes. For filling or for fast changing
to reserve tanks, the tank can be simply lifted off the cart.
The water tank comes with all necessary connections and
hoses. Mounting to the cart and Power Cut are very fast and
simple.

Mains/pressure water system

The mains/pressure water system is designed to be mounted
on the Power Cut. It can be used with or without the cart, but
is especially suitable for applications involving hand-held,
stationary cutting. The water line has a fast-release connec-
tion, and can be fed either from a mains supply or from a
pressure tank (7).
The water system comes with all necessary connections and
lines. It can be quickly and easily mounted on the Power Cut.
See "Accessories" for order number.
6
(5)
2
7
(6)
5
4
25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pc-6414Pc-7312Pc-7314

Table des Matières