Technical Data; Definitions: Safety Guidelines - DeWalt DCS334 Traduction De La Notice D'instructions Originale

CORDLESS JIGSAW
DCS334, DCS335
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No-load speed
Stroke length
Cutting depth in:
wood
aluminum
steel
Bevel angle adjustment (l/r)
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841-2-11:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
While cutting board
Handle
Vibration emission value a =
h,B
Uncertainty K =
Head
Vibration emission value a =
h,B
Uncertainty K =
While cutting sheet metal
Handle
Vibration emission value a =
h,M
Uncertainty K =
Head
Vibration emission value a =
h,M
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
WALT one of the
e
DCS334 DCS335
V 18 18
DC
1 1
Li-Ion Li-Ion
min -1 0–3200 1000–3200
mm 26 26
mm 135 135
mm 25 25
mm 10 10
˚ 0–45 0–45
kg 2.1 2.0
dB(A) 84 86
dB(A) 95 97
dB(A) 3 3
m/s 7.0 5.3
2
m/s 1.5 1.5
2
m/s – 13.3
2
m/s – 3.6
2
m/s 2 5.8 5.1
m/s 2 1.5 1.5
m/s 2 – 8.1
m/s 2 – 2.3
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
EC-Declaration of Conformity
Machinery Directive
Cordless Jigsaw
DCS334, DCS335
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-11:2016.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
23.05.2018
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
EngLISh
WALT at
e
WALT.
e
29