Selecting the telephone muting
This mode is used when a cellular phone system is connected. Depending on the phone
system used, select either "MUTING 1" or "MUTING 2," whichever mutes the sounds from this
unit. When shipped from the factory, this mode is deactivated.
• MUTING 1: Select this if this setting can mute the sounds.
• MUTING 2: Select this if this setting can mute the sounds.
• OFF:
Cancels the telephone muting.
1. Press and hold SEL (select) for more than 2 seconds so that "PSM" appears on the lower
part of the display.
2. Select "TEL (telephone)" with
3. Select the desired mode with the control dial.
The telephone muting mode changes as follows:
Turning on/off the key-touch tone
You can deactivate the key-touch tone if you do not want to make it beep when you press a
button. When shipped from the factory, the key-touch tone is activated.
• ON:
Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
1. Press and hold SEL (select) for more than 2 seconds so that "PSM" appears on the lower
part of the display.
2. Select "BEEP" with
3. Select the desired mode with the control dial.
The key-touch tone alternates between on and off.
Turning on/off the power amplifier switch
(ONLY FOR KS-FX940R)
You can switch off the built-in amplifier and send the audio signals only to the external
amplifier(s) to get clear sounds and to prevent internal heat buildup inside this unit. When
shipped from the factory, the power amplifier switch is turned on so that built-in amplifier
works.
• ON:
Select this mode when not using external power amplifier(s).
• OFF: Select this mode when using external power amplifier(s).
1. Press and hold SEL (select) for more than 2 seconds so that "PSM" appears on the lower
part of the display.
2. Select "P–AMP SW (power amplifier switch)" with
3. Select the desired mode with the control dial.
The power amplifier switch alternates between on and off.
¢ or 4
MUTING 1
MUTING 2
¢ or 4
.
ON
OFF
ON
OFF
.
OFF
¢ or 4
.
31