Zyxel AG-220 Guide De Démarrage Rapide page 10

settings. Refer to the User's Guide for how to configure
security settings.
If no entries appear in the list, there are no available wireless
networks within range. See Troubleshooting or the User's
Guide for more information.
Note for Windows XP Users
If you want to use WZC, either disable the ZyXEL utility (if you
already installed it) or just install the driver.
• To disable the ZyXEL utility, right-click the
Use Windows Zero Configuration. To activate the ZyXEL
utility again, double-click the
• To install the driver only, select Driver only.
Troubleshooting
• If the LINK light on the AG-220 is not on after you have
installed the utility and the AG-220, make sure the AG-220 is
properly inserted.
• If the icon does not display, uninstall and re-install the util-
ity. See the User's Guide for how to uninstall the utility.
• If your AG-220 does not connect to a wireless network, make
sure there is an available wireless network within range (see
your User's Guide for more details about the site survey fea-
ture). If wireless security is enabled for that network, you
need to configure the security settings of your AG-220 (see
the User's Guide).
ENGLISH
icon and click OK.
8
icon and select