Configuration And Operation - Tripp-Lite PDUMH15NET Mode D'emploi

Features
Mini-DIN Serial Port: Use this port to provide a direct
terminal connection to a computer with a terminal
emulation program. A serial cable (part number 73-1025)
is included with the PDU. If you need to order a
replacement cable, contact Tripp Lite Customer Support
at (773) 869-1234.
Ethernet Port: Use this RJ-45 jack to connect the PDU
to the network with a standard Ethernet patch cable. The
Link LED and Status LED
A
conditions, as shown in the table below. This port is not
compatible with PoE (Power Over Ethernet) applications.
Network Operating Conditions
Link LED Color
A
Off
Flashing Amber
Flashing Green
Status LED Color
B
Off
Steady Green
Flashing Amber

Configuration and Operation

Remote Monitoring and Control
The PDU provides remote monitoring
outlet control
B
browser, telnet and SNMP-based
Network Management Systems. For
more information about configuration
and operation of the PDU via the
PowerAlert Web browser interface, refer
to the SNMPWEBCARD User's Guide,
included on the CD-ROM bundled with
the PDU.
201110148-93-3042.indb 7
continued
indicate several operating
B
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
and more via Web
,
A
7
A B
A
B
11/9/2011 11:21:11 AM