Tripp-Lite PDUMH15NET Mode D'emploi page 6

Features
continued
NEMA 5-15/20R Output Receptacles (PDUMH20NET):
During normal operation, the output receptacles distribute
AC power to connected equipment. When an outlet is
live, its associated LED illuminates.
Digital Load Meter (Ammeter): The total electrical
current drawn by connected equipment is displayed on
the meter in amperes.
Cord Retention Shelf: When attached to the PDU, the
cord retention shelf provides secure attachment points for
the input cord and connected equipment cords. Use the
included cable ties to secure the cords to the shelf.
Longer Mounting Brackets: Use these brackets to
mount the PDU horizontally in a standard rack or rack
enclosure. The mounting depth can be adjusted by
attaching the brackets to different positions on the PDU.
Shorter Mounting Brackets: Use these brackets to
mount the PDU in a 0U rack, wall or under-counter
configuration.
Factory Port: The port is reserved for configuration by
factory authorized personnel only. Do not connect
anything to the port.
PS/2 Port: Use this port to connect a Tripp Lite
ENVIROSENSE environmental sensor to provide remote
temperature/humidity monitoring and a dry contact
interface to control and monitor alarm, security and
telecom devices. Contact Tripp Lite Customer Support at
(773) 869-1234 for ordering information. Note: Do not
connect a keyboard or mouse to this port.
6
201110148-93-3042.indb 6 11/9/2011 11:21:10 AM