Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
Troubleshooting
Problem
Possible cause
Solution
Plug fuse blown (UK only)
Replace fuse (UK only)
Machine will not start
Circuit breaker tripped
Reset circuit breaker
Tool fault
Have the tool serviced by an authorised Silverline service centre
Wheel out of balance
Dress wheels
Wheel loose
Turn off immediately and retighten wheel fittings
Wheel damaged
Turn off immediately and replace the wheel
Excessive vibration when in use
Tool not fully secured to workbench
Check and tighten bolts and fittings
Tool has been directly bolted to metal workbench or
Fit a vibration-reducing material between the tool and the workbench
rubber feet missing or damaged
surface. A small piece of wood would be suitable
8
Publicité
Table des Matières
